Permeable Paver | Porous Pavement Gravel Paver ::: Gravelpave2

Gravelpave² consists of a geotextile fabric injection molded to the ring and grid structure. Gravelpave2 comes in 4 standard colors to match your aggregate fill. Gravelpave² also requires a base course (not shown).

Parking Lot with Gravelpave2 porous grass paver

Unlimited traffic volume, low speed parking lots are perfect for Gravelpave².

Gravelpave2 | porous pavement

Gravelpave² has been tested as a wheelchair accessible surface (ADA) for use in public spaces such as the Pentagon Memorial, Arlington, VA. View the Test.

Gravelpave2 | pervious paving

Gravelpave² makes an attractive and permeable roadway in Austin, TX.

Gravelpave² porous pavement allows you to park, drive, walk, or ride on a beautiful decorative gravel surface.

Benefits

Pervious Load Bearing Surface
Stormwater Pollution Filtration and Treatment
Heat Energy Reflection Reduction, “Cool” Surface
Tree Growth within Parking Areas
5,721 psi Compressive Strength
Large Rolls for Easy Installation

Applications

All Parking Aisles and Bays
Handicap Parking Spaces
Automobile and Truck Storage Yards
All Service and Access Drives
Loading Dock Areas
Trails for Multiple Uses
Boat Ramps
Outdoor Bulk Storage Areas
Infiltration Basins
High-Use Pedestrian Areas

Gravelpave² is a structure to provide heavy load bearing support and true containment of gravel to create a porous surface with unlimited traffic volume and/or duration time for parking. The system can be used for storage and filtration of rainwater. For example, a cross-section with an 12" deep base course (at 20% void space) and the one inch of Gravelapve² (at 35%) would store 2.75" of rain. Although bacteria concentrations are lower than with Grasspave², polluted runoff and vehicle drippings are consumed prior to reaching the water table.

32 12 43 Flexible Porous Pavement

Gravelpave² is listed in the Construction Specifiers Master Spec Format in Section 32 12 43. You may also place it in the 1995 Master Format Version in section 02795.

Sizes

Manufactured in 1 square meter units (3.3' x 3.3') or quarter-meter units (1.65 feet x 1.65 feet) and assembled into rolls. Please view our Roll Chart for dimensions. Some curves can be achieved without cutting.